1. Microsoft 3d Builder For Mac Download
2. Microsoft 3d Builder For Mac Windows 10
3. Microsoft App Connector

Windows 10 isn't only about new features and improvements. It's also about an operating system that focuses on apps. As Microsoft keeps updating the OS, you might have noticed that they are regularly replacing old apps with new modern ones and adding whole new apps.

• Removing apps How to completely remove the 3D Builder app from Windows 10 If the 3D Builder app isn't for you, in this guide, we'll show you the steps to remove it while preventing from.
• View 3D models by Microsoft (@microsoft).

Your Microsoft account comes with 5GB of storage and the option to add more when you need it. Find, lock, or erase a lost or stolen Windows 10 device, schedule a repair, and get support. Mixer is where gamers come together to play, celebrate, and share the best moments in gaming.

One of these new default apps is the new 3D Builder app, which was designed to create, edit, and print 3D models to a 3D printer. However, even though 3D printers are now more affordable, not everyone has one nor needs to use the 3D Builder app.

If you don't have an use for the 3D Builder app — like with other built-in apps — you can uninstall it from Windows 10. But there is a little problem: merely uninstalling the app will leave behind the '3D Print with 3D Builder' option in the context menu for .bmp, .jpg, and .png file extensions. And if you click the option by accident, the 3D Builder app will reinstall automatically. Fortunately there is a workaround to prevent this from happening.

In this Windows 10 guide, we'll walk you through the steps to completely remove 3D Builder by uninstalling, and removing the option from the context menu to prevent the app from coming back.

How to uninstall the 3D Builder app

1. Open Settings.
2. Click on System.
3. Click on Apps & features.
4. Select 3D Builder.

5. Click Uninstall.

6. Click the Uninstall button again to confirm and complete the task.

How to remove the 3D Builder context menu option

Once you uninstall the app, you'll need to edit the Registry to remove the '3D Print with 3D Builder' from the context menu to prevent the app from coming back to Windows 10.

Important: As always, this is a friendly reminder to let you know that editing the registry is risky, and it can cause irreversible damage to your installation if you don't do it correctly. It's recommended to make a full backup of your PC before proceeding.

1. Use the Windows key + R keyboard shortcut to open the Run command
2. Type regedit, and click OK to open the registry.

3. Browse the following path:

   HKEY_CLASSES_ROOTSystemFileAssociations.bmpShell

4. Under the Shell (folder) key, right-click the T3D Print subkey, and click Delete.

5. Click Yes to confirm.

6. Browse the following path:

   HKEY_CLASSES_ROOTSystemFileAssociations.jpgShell

7. Under the Shell (folder) key, right-click the T3D Print subkey, and click Delete.
8. Click Yes to confirm.

9. Browse the following path:

   HKEY_CLASSES_ROOTSystemFileAssociations.pngShell

10. Under the Shell (folder) key, right-click the T3D Print subkey, and click Delete.
11. Click Yes to confirm.
12. Close the Registry to complete the task.

After completing the steps, when you right-click an .bmp, .jpg, or .png image files, the context menu will no longer show '3D Print with 3D Builder', which will also prevent you from reinstalling the app by mistake.

Context menu with '3D Print with 3D Builder' (left), Context menu without '3D Print with 3D Builder' (right)

How to bring back 3D Builder and the context menu option

If the time comes when you need 3D Builder back, you can always reinstall the app by downloading it from the Windows Store.

It's important to note that reinstalling the app won't bring back the T3D Print keys you deleted from the Registry. The only way to restore them is by using a previous backup or exporting each key before deleting them with the steps mentioned above.

To export the T3D Print keys before removing them from the Registry, do the following:

1. Use the Windows key + R keyboard shortcut to open the Run command
2. Type regedit, and click OK to open the registry.

3. Browse the following path:

   HKEY_CLASSES_ROOTSystemFileAssociations.bmpShell

4. Right-click the T3D Print subkey, and click Export.

5. Save the file with a descriptive name.

6. Telecharger word office gratuit. Browse the following path:

   HKEY_CLASSES_ROOTSystemFileAssociations.jpgShell

7. Right-click the T3D Print subkey, and click Export.
8. Save the file with a descriptive name.

9. Browse the following path:

   HKEY_CLASSES_ROOTSystemFileAssociations.pngShell

10. Right-click the T3D Print subkey, and click Export.
11. Save the file with a descriptive name.

When you want to restore the '3D Print with 3D Builder' option in the context menu, simply double-click each .reg files you exported with the above steps and click Yes to merge the key into the Registry.

More Windows 10 resources

For more help articles, coverage, and answers on Windows 10, you can visit the following resources:

We may earn a commission for purchases using our links. Learn more.

How to sanitize all types of Xbox controllers properly

We live in strange times that will hopefully blow over soon. Until then, though, we're all adapting to new habits, which include cleaning and sanitizing stuff more than we may do usually. Here's how to give an Xbox controller a nice clean.

There is a big difference between a 3D model and a 3D model designed for 3D printing. 3D printing a model requires a lot of specific parameters on the model to be exact for the print to succeed. For example, too big an overhang on a print will cause the printer to try and print in midair making it look stringy or may just collapse the model unless you use supports. By using supports, however, you can scar the surface of the print which you will then need to sand away before the print looks good.

So whats the answer?

Ideally, you want to be able to minimize the overhangs and supports on the model before you actually print it, and that's where splitting comes in. Using the split function in 3D builder you can slice a model into a number of smaller parts along certain planes or axis to reduce the need for support or to eliminate overhangs. In this How-To we will be using this model of a Rocketship made by hayling99 on Thingiverse to show where and how to cut. As you can see if you tried to print this the way it is right now you will either need a lot of support around the bottom or watch the whole model fall to pieces as you print.

Step by Step

1. Open 3D Builder and choose Open to select your model.
2. Select the Edit tab on the top menu.
3. Select the split action from the edit menu.
4. Select the Keep Both option from the split menu.
5. Position the cutting plane using the rotation gyroscope.
6. Select Cut to select your choice.
7. Select Done to finalize your selection.
8. Select the Object tab in the top menu.
9. Select the floating model then click Settle.
10. Rotate the bottom model 180 degrees.
11. Repeat step by step instructions 8 and 9 to Settle the bottom object.
12. Select Save as and save as a .STL file.

The details

Slicing a 3D model with 3D Builder is incredibly simple, much simpler than most apps, even Tinkercad — in Tinkercad you have to create two square holes and then two copies of the model and group them to make the slices — a few simple clicks and 3D builder will have it done. The most difficult part is deciding where to cut and how many cuts you will need. Working with our rocket demo you can see that the cut is made just high enough that thrusters can be placed upside down on a flat print bed. This also makes lining the prints up to glue them back together much easier.

When you select Split from the Edit tab you will need to make sure you select the Keep Both option or 3D builder will assume you don't want to keep some of the models and delete it which can be a pain. now you have the cutting plane you can choose the position you want it to slice. I went for just above the thrusters and then decided to make a second cut above the fuselage so that all the printed parts are roughly the same height. By keeping the prints the same height you increase the layer cooling time, giving small layers like the nose point sufficient time to cool so it doesn't look ugly and melted.

Once you have completed the slices it is important to make sure all the models are orientated correctly so no overhangs are left or that any that are have a minimum need for support. As you can see in the model nowhere in this model will support be needed now that it is sliced. It would be amazing if we could do this with all models but unfortunately, you will have to use the occasional support, though, if your overhang is less than 35 degrees then your printer should be able to cope with it just fine.

Once you have rotated them all to the right way you can choose to settle the models. This will drop them down onto the print bed and allow them to be printed easily. If you forget this part and save your model as a .STL file without settling them your printer will try to print your model in midair which will make a lovely 3D model of spaghetti rather than the model you actually wanted. don't worry though if you followed the Step by Step guide that shouldn't happen to you and your prints should print with minimal fuss. Maybe. There are still a lot of variables but splitting really does help.

Any questions?

Let me know down in the comments section if you need more information or if you guys have found an easier way to slice 3D models than using 3D Builder. With 3D builder coming free with Windows 10 now It feels like a no-brainer to use its best feature.

Microsoft 3d Builder For Mac Download

Microsoft 3d Builder For Mac Windows 10

Check out these good tech stories to brighten your day

Microsoft App Connector

If you're looking for a respite from the ball of stress that is the world right now, here are a few lighter pieces of news from the tech world for April 7. Today we've got a Zoom music video, an app for couple communication, and more.